Home

Products

What's New

Downloads

Sales Reps

Request Info

WHAT'S NEW
bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes)  bullet.gif (851 bytes) 

 

LOOP POWERED LED INDICATOR
DM700/I Series
  • Local Transmitter Display
    Pressure, Level, Flow, Temperature, RH. etc.
  • EX & NEMA 4X Housings
  • Push Button Programming
    (no reference signal required)
  • 4 Digit LED Display
  • 1/2" NPT Fittings
  • Custom Linearization
  • FM & ATEX Approvals Pending
  • HART Transparent
INTRODUCTION
 The Model DM700/I Cap is a two wire current loop indicator that is powered by the 4 to 20 mADC process signal it is displaying. The face of the Cap houses a 4 digit red LED display. The back contains the screw terminal connections and three push buttons used to program and calibrate the unit by means of a simple menu. The menu allows the user to select units, input/output scaling, offset, decimal point position, and password protection. The DM700/I contains several linearizations which can be applied to the display: square root, X3/2, X5/2 or user defined 19 segment linearization curve.

The entire DM700/I is sealed in the cap that fits directly into SCH series of NEMA 4X and Explosion Proof housings. Housings have provisions for including temperature transmitters. Optional kits are available for pipe mounting, DIN rail mount or placement of the Cap into other style housings.
     
INTRINSIC SAFETY APPROVALS - FM and ATEX pending

bullet.gif (851 bytes)  bullet.gif (851 bytes)          bullet.gif (851 bytes)  bullet.gif (851 bytes)

 

BATTERY POWERED THERMOMETER
DM640 Series
  • Battery Powered
  • 4 Digit Display
  • RTD or T/C Input
  • FM & ATEX Approvals Pending
  • EX & NEMA 4X Housings
  • Potted Electronics

 
DESCRIPTION
The Model DM600 Cap Series is a line of battery powered temperature indicators which accepts a Pt100 RTD or thermocouple input depending on the model. The face of the Cap houses a 4 digit LCD display. The back contains the screw terminal connections, battery and three push buttons used to program and calibrate the unit.

The sensor type is selected from a simple to use menu system which is navigated by the use of the three push-button keys. The menu also allows the user to select units (ºC or ºF), offset temperature, decimal point position, and password protection.

The entire assembly is sealed into a Cap that fits directly into the SCH series of NEMA 4X and Explosion Proof housings. Optional mounting kits are available for placement of the Cap into other style housings if needed.

Intrinsically Safe FM and ATEX approved versions are pending.

bullet.gif (851 bytes)  bullet.gif (851 bytes)          bullet.gif (851 bytes)  bullet.gif (851 bytes)

Multi Pump Level Control Application Sheet
(to see details click on above title)
Level control in sewage lift stations is normally provided by two or more pumps, with a level controller to tell the pumps when to start and stop. Our software equalizes the pump usage to extend the life of the individual pumps.

bullet.gif (851 bytes)  bullet.gif (851 bytes)          bullet.gif (851 bytes)  bullet.gif (851 bytes)

Call (800) 700-3272 for literature and pricing.  If you prefer to ask for information via the internet use the "REQUEST INFO" button at the top of this screen or e-mail = bm@statinst.com.

© 1997 Status Instruments, Inc. - All Rights Reserved